Call: 0123456789 | Email: info@example.com

Learn How To Solve Plumbing Problems


Good plumbing maintenance is relatively easy, but failing to keep up with it can mean costly repairs. Here are some good ways you can take care of your plumbing, either yourself or with the help of a licensed professional. Take care of your house now and it will beneift you in the future.

Rigid copper is used for main water lines in many homes. You cannot bend rigid copper, so joints and tees must be soldered on. When soldering, always apply flux (also called soldering paste) to both surfaces. Flux retards oxidation when the copper is heated. Always use lead-free or nearly lead-free solder when sweating a copper joint.

To prevent the pipes from freezing, it is advisable to seal off air vents, cracks and access doors. In order to keep the heat in and the cold out, you can try using insulation or caulk. In the event a leak occurs, make it a point to remind everyone where the master circuit breaker is so it can be shut off immediately.

You need to winter-proof your house. You have to make sure you switch of the master circuit breaker or the shut-off valve before you leave your house. Since one small hole or congested water can quickly freeze and cause pipes to break and expand, you need to drain and open all outdoor and household water lines.

Don’t start any do-it-yourself plumbing project without having a plan in place. You need to know beforehand exactly what you are getting yourself into. Know what kind of space you are working with and what lines are which. Getting a clear picture early on will make your plumbing project go a lot smoother!

Do not be surprised if a plumber charges you more than you expected. Many customers think that fixing a toilet or other drainage problem should be easy, therefore the price should be low. You must remember that not only does a plumber have to charge for labor, but they have to charge for parts that you need.

Fix issues related to low water pressure that are a result of a buildup of sediment by cleansing the aerator. Remove the aerator, and then take it apart so it can be cleaned with a brush that has been dipped in vinegar. Then you can simply rinse off the aerator and reassemble the faucet. That should help raise water pressure, as any aerator obstacles will be gone.

Treating your drains every month is a great way to avoid future clogs and other problems, and it’s a very simple procedure. Just run one to two gallons of hot tap water down each drain in your house.

The valves that are rarely used can fuse together easily. Periodically turn these valves off and one. Use specially designed oils that can work their way through the buildup to keep them loosened up and operable.

As mentioned above, most periodic plumbing maintenance is simple and straightforward. Most repairs resulting from serious damage to your plumbing are not. Now that you know how to deal with the plubming issues in your home, you should be more prepared to prevent or mitigate the more serious problems that can result.

Have any Question or Comment?

Leave a Reply